120v Hot Tub 2-Person: Affordable, Space-Saving, Relaxation

I’m looking for a hot tub that runs on 120V and can fit two people, but I’m uncertain where to start. You’re not alone.

It can be difficult to find a hot tub that is compact, plug-and-play, and affordable while also being powerful enough. We have you covered if you’re looking at Costco deals, comparing prices, or simply wondering if 120V is sufficient.

We’ll break it down, with no confusing specifications, just clear answers to aid you in selecting the appropriate hot tub for your space.

Top 120V 2-Person Hot Tub Models

AquaRest Spas Select 300

The AquaRest Spas Select 300 is a compact, plug-and-play hot tub designed for two adults, offering a blend of relaxation and convenience.

Product Features:

• Dimensions: 80″ x 68″ x 31″
• Seating Capacity: 2 adults
• Jets: 20 stainless steel hydrotherapy jets
• Waterfall: Multi-color LED backlit waterfall with nine color settings
• Construction: Durable, impact-resistant polyethylene shell
• Insulation: Full foam insulation for energy efficiency
• Controls: Digital control panel
• Filtration: Easy Kleen 100% filtration system
• Electrical Requirements: 120V / 15amp plug-and-play; convertible to 240V for faster heating
• Included Accessories: Premium thermal locking cover, EZ access water drain valve

Where Is the Drain Valve on the Aquarest Select 300?

If you’re struggling to find the drain valve on your Aquarest Select 300, you’re not alone. Many users report confusion with its location, especially since it’s not clearly marked and often tucked away.

Here’s what fellow owners found:

• The clear tube you see inside? That’s not always the drain. Some users say it’s embedded in insulation or connected elsewhere.
• Don’t pry too hard. The side panel can be tightly screwed in (some reported up to 10 screws) and hard to remove without damaging the shell.
• One Reddit user clarified:
  “Look on the opposite side from the control panel, down low near the bottom curve on the filter side. That’s where you’ll find a small drain plug.”
• The plug near the pump or heater is not for draining the tub.

Freeflow Spas Mini

The Freeflow Spas Mini is a compact, plug-and-play hot tub designed to comfortably accommodate two adults, making it an excellent choice for those with limited space.

Product Features:

• Dimensions: 6′ x 3’11” x 28″
• Seating Capacity: 2 adults
• Water Capacity: 120 gallons
• Dry Weight: 250 lbs.
• Jets: 10 strategically placed jets
• Construction: Durable, impact-resistant polyethylene shell
• Insulation: Full foam insulation for energy efficiency
• Controls: Digital control panel
• Electrical Requirements: 110V plug-and-play with GFCI power cord; convertible to 230V for enhanced performance
• Included Accessories: Removable accessory tray

ALEKO 2-Person Inflatable Hot Tub

The ALEKO 2-Person Inflatable Hot Tub offers a blend of portability and relaxation, making it an excellent choice for those seeking a budget-friendly spa experience.

Product Features:

• Dimensions: Outer dimensions of 75 x 47 x 26 inches; inner dimensions of 59 x 32 x 26 inches.
• Water Capacity: Holds up to 145 gallons.
• Jets: Equipped with 100 high-powered bubble jets for a soothing massage.
• Heating System: Built-in 1800-watt (110-120V) power pack with a 1200-watt heater.
• Bubble Feature: 600-watt bubble function enhances relaxation.
• Filtration: Includes a 120V AC filter pump to maintain clean water.
• Accessories: Comes with an insulated cover, drink tray, and cup holders for added convenience.

Essential Hot Tubs 20-Jets 2021 Arbor Hot Tub, Seats 5-7, Cobblestone

Indulge in luxury with the Essential Hot Tubs Arbor Hot Tub. With 20 stainless steel jets, contour-style seating for 6 people, and a plug-and-play design, this hot tub offers relaxation and deep therapy massages with ease. The all-season stainless steel Balboa heater ensures year-round enjoyment and includes a heavy-duty insulated cover. Made in the USA for trusted quality.

Which color should I get my new 120v hot tub in – blue, green, or red

Which color should I get my new 120v hot tub in?

Blue: If you’re looking for a relaxing color that will make you feel like you’re back at the beach, then blue is likely the best choice. Plus, it will help to offset the heat of the water and make any heat-related burns less noticeable.

Green: Although red may be more popular, this option is great if you want something soothing and serene. The perfect color if you’re planning to use it as a spa and not just as a way to luxuriate in some warm water.

Red: If you want something that stands out or wants to be noticed by guests, this is one of the best options for you.

How do I choose between an 8-person and a 120v Hot Tub 2-person?

• If you want to use your 120v hot tub as a spa more than just a way to luxuriate in some warm water, then the 8-person option is likely the best for you.
• If you’re looking for something that’s easy to store or doesn’t have a lot of space, then the 2 person option is likely the best for you.
• Keep in mind that you will need to buy more than one 120v hot tub if more than two people want to use it.

What should I consider before buying a 120v hot tub?

• How often do you plan on using it?
• How many people do you plan on using it with?
• What is your budget?
• What is your available space like?
• Do you need a cover to keep the water warm?
• How easy is it to heat up the water?

These are some questions you may want to ask yourself before purchasing a hot tub. Hot tubs are a luxurious way to enjoy hot spa water in the comfort of your own home, and with a little bit of research, you’re sure to find the perfect one for you. You can check hot tubs under $400 on Hottubpatio.

Hot Tub Troubleshooting: How to Turn on a 120V Hot Tub

To turn on a 120v hot tub, follow these steps:

1. Locate the power switch, which is usually covered and located near the spa light.
2. Flip up the cover of the power switch.
3. Flip the switch up to turn on the hot tub. It’s a toggle switch, so you can turn it down to turn off the spa.
4. Before turning on the hot tub, it’s a good idea to test the jets first. Find the control that operates the jets and switch it on.
5. Once the jets are on, check if the water fills up. If it does, you’re ready to use the hot tub.
6. If the tub doesn’t fill with water, try pressing the reset button, usually outside the hot tub.
7. If the reset button doesn’t work, there may be a more serious issue that requires professional assistance.

Cleaning Your New 120V Hot Tub

Here’s a concise version of the steps to clean your 120V hot tub:

1. Drain the hot tub and disconnect the power cord.
2. Remove the filter, jets, and pump for cleaning.
3. Clean the filter with a gentle stream of water from a garden hose or sprayer.
4. Rinse the filter thoroughly and put it back together.
5. Clean the pump by spraying it down with an enzyme cleaner or vinegar mix (1 part vinegar to 4 parts water).
6. Rinse off any excess cleaner before reassembling your hot tub.

Remember to refer to your hot tub’s manual for specific cleaning instructions and safety guidelines. If you’re unsure about any steps, it’s best to consult the manual or seek help from a qualified hot tub technician.

Hot tub professionals in the USA:

• Houzz: This website helps you find spa and hot tub dealers in your area. You can narrow your search by location, professional category, project type, budget, and more. 
• Pool & Hot Tub Alliance: This organization provides education, certification, advocacy, and safety awareness for the pool and hot tub industry.

Winterizing Your 120V Hot Tub – Essential Steps for Cold Weather

Follow these steps to properly winterize your 120V hot tub if you live in an area with freezing temperatures:

1. Drain the hot tub of all water, including removing the scum line and standing water from the filter system. Also, remove any floating debris.
2. If necessary, clean the cover and check for debris in the safety locking mechanism if you have a hard top cover.
3. Use a soft bristle brush attachment to vacuum the cabinet to remove dirt or residue build-up.
4. Remove and clean the filters with a bleach/water solution, allowing them to dry completely before reinstalling.
5. Polish or clean the exterior, if necessary.
6. Reinstall the cover.
7. Plug in the hot tub and turn on the pump to circulate the water for a few minutes, checking for leaks. Then, turn off the pump and unplug the hot tub.
8. Reinstall the filters, if applicable, or replace in-line water filters for some models.
9. If your hot tub has an air blower, turn it on to remove accumulated water.
10. Before storing the hot tub for the winter season, turn off all breakers or unplug it from the wall socket.

Properly winterizing your hot tub protects it from freezing temperatures and potential damage. Always refer to your hot tub’s manual for specific instructions and seek professional help if needed.

Are 120V Hot Tubs a Good Choice?

Considerations to keep in mind:

• Pros: Lower cost and easier installation.
• Cons: Slower heating and lower heat retention.
• Consider your needs, budget, and climate before deciding on hot tub voltage.