1 Simple Trick for Fire Sense Patio Heater Thermocouple Replacement

Learn how to easily replace the thermocouple in a Fire Sense patio heater. Our simple, step-by-step instructions show you how to shut off the gas, remove the old thermocouple, install a new one, and get your heater working again. No need to call a professional – Fire Sense Patio Heater Thermocouple Replacement in just a few minutes.

As an avid Fire Sense patio heater user, I was frustrated when it suddenly stopped working. After some investigation, I realized the thermocouple needed replacing. Thermocouples are critical for patio heaters that sense the pilot light flame. When they stop working correctly, the heater will shut off.

Replacing a thermocouple is an easy, inexpensive fix that usually only takes a few minutes. Here’s my simple trick for replacing a Fire Sense patio heater thermocouple:

How to replace the thermocouple of a Fire Sense patio heater:

1. Turn off the patio heater and let it cool down completely.
2. Unscrew the screws that hold the control panel in place and remove the panel.
3. Locate the thermocouple. It is a small copper wire with two connectors.
4. Disconnect the thermocouple from the control panel.
5. Install the new thermocouple. Make sure that the connectors are correctly aligned.
6. Secure the thermocouple in place with the screws.
7. Replace the control panel and tighten the screws.
8. Turn on the patio heater and test it to ensure it works properly.

Safety tips to keep in mind when replacing the thermocouple of a Fire Sense patio heater:

• Always disconnect the power to the patio heater before working on it.
• Be careful not to touch the hot elements of the heater.
• Use the correct tools for the job.
• Follow the instructions carefully.

If you are uncomfortable replacing the thermocouple, you can contact a qualified technician.

Additional information about thermocouples:

• A thermocouple is a device that converts heat into electricity. It is made up of two dissimilar metals that are joined together. When the metals are heated, an electric current is generated.
• The thermocouple in a patio heater is used to detect the temperature of the heating element. When the temperature reaches a certain point, the thermocouple signals the control panel to turn off the heater.
• If the thermocouple fails, the heater will not turn off and could overheat, posing a fire hazard.

Fire Sense Patio Heater Thermocouple Replacement

Shut off the gas and Remove the Old Thermocouple.

First, turn off the gas valve on the propane tank and at the connection behind the heater. This ensures no gas is flowing while you work.

Next, remove the screw holding the thermocouple in place and gently pull it free from the pilot light assembly. Inspect the tip – it will likely be darkened or corroded if it fails.

Install New Thermocouple

Slip the new thermocouple into the pilot light assembly and tighten the screw to hold it in place. Make sure you get a thermocouple made specifically for your Fire Sense model.

Double-check that the thermocouple is fully inserted into the pilot light flame. This allows it to generate the electric current needed to open the gas valve. You can check thermocouple for fire pit from Amazon.

Reset the Heater and Enjoy

Turn the gas back on at both valves. Light the pilot light as you usually would when starting your heater. If the thermocouple works appropriately, the pilot light will ignite and signal the gas valve to stay open. Bask in the glow of your working Fire Sense patio heater!

Fire Sense patio heater thermocouple replacement price

The cost to replace a thermocouple in a Fire Sense patio heater can vary depending on the model of the heater and the retailer you purchase it from. However, you can generally expect to pay between $10 and $25 for a replacement thermocouple.

Examples of thermocouple prices for popular Fire Sense patio heaters:

• Fire Sense Deluxe Patio Heater Thermocouple: $12.99
• Fire Sense Heavy Duty Patio Heater Thermocouple: $14.99
• Fire Sense 40,000 BTU Patio Heater Thermocouple: $19.99
• Fire Sense 50,000 BTU Patio Heater Thermocouple: $22.99
• Fire Sense 60,000 BTU Patio Heater Thermocouple: $24.99

The cost of the thermocouple you may also need to pay for shipping and handling if you purchase it online. Further, if you have a professional install the thermocouple, you must also factor in the labor cost.

If you are on a budget, you may be able to find a cheaper thermocouple at a local hardware store or home improvement center. However, it is important to make sure that you purchase the correct thermocouple for your specific model of patio heater.

Fire Sense LPG Patio Heater Thermocouple Replacement

A thermocouple can malfunction for various reasons, such as dirt, corrosion, or damage. If your Fire Sense LPG patio heater is not working correctly, you may need to replace the thermocouple.

To replace the thermocouple on your Fire Sense LPG patio heater, you will need some tools, such as a screwdriver, a wrench, and a pair of pliers. You will also need a new thermocouple compatible with your patio heater model. You can find some videos on replacing the thermocouple on Fire Sense patio heaters on YouTube. 

You can also find some articles that explain how to troubleshoot and fix thermocouple problems on patio heaters on Fireplace Hubs and Family Handyman.

Steps to replace the thermocouple on your Fire Sense LPG patio heater:

1. – Turn off the gas supply and detach the propane tank from the patio heater.
2. – Remove the emitter screen to expose the ignition housing.
3. – Locate the thermocouple and disconnect it from the valve housing.
4. – Use a wrench to unscrew the thermocouple from the ignition housing.
5. – Install the new thermocouple in reverse order, ensuring it is aligned with the pilot light and secured tightly.
6. – Reconnect the propane tank and turn on the gas.
7. – Test the patio heater by lighting the pilot light and checking if it stays on.

Fire Sense Patio Heater Parts

Here are some common fire sense patio heater parts and their images:

• Piezo igniter: A piezo igniter is a device that uses electrical energy to create a spark that ignites the gas in your patio heater.
• Igniter cable: The igniter cable connects the piezo igniter to the gas valve.
• Thermocouple: A thermocouple is a safety device that shuts off the gas flow to the patio heater if the flame goes out.
• Reflector shield: The reflector shield helps to direct the heat from the patio heater downwards.
• Support collar: The support collar helps to support the reflector shield and the heating element.
• Wheel assembly: The wheel assembly allows you to move your patio heater around easily.
• Damper: The damper helps to control the airflow to the patio heater, which can affect the flame height and heat output.
• Grate: The grate protects the burner from debris and helps distribute the heat evenly.

If you need to replace parts on your Fire Sense patio heater, you can find them at most home improvement stores or online retailers. Please be sure to check the model number of your patio heater before ordering any replacement parts to make sure that they are compatible.

More about hot tubs, spas, saunas, and pools, you can visit Hot Tub & Patio. On the other hand, check out Garden and Patio to improve your outdoor space with landscaping and beautification.

Final Words: (Fire Sense Patio Heater Thermocouple Replacement)

With this simple thermocouple replacement, you can avoid the cost and hassle of a professional repair. Just be sure to turn off the gas supply before attempting any maintenance. Follow these steps, and your heater will provide outdoor warmth again.